fbpx

Order Tour Abdominal Swing-Away

Order Tour Abdominal Swing-Away2018-07-25T18:54:16-05:00

Tour Swing-Away

Let’s all get comfortable!

Add the Abdominal Swing-Away feature to the Tour and pregnant women and those with a little extra around the middle can comfortably lie prone again!

Adjustable Height Legs available (new or retrofit)
Shoulder Strap included on all tables

Choice of Wood (Oak or Walnut)

Description

Standard Features
  • Oak Wood Construction
  • Abdominal Swing-Away
  • Interchangeable Chest Cushions: Firm Cushion for adjusting and Soft Cushion for female comfort
  • Headpiece Flexion, Extension & Elevation
  • Headpiece Straight Drop & Forward Motion Drop
  • Thoracic Drop (Incline not available)
  • Pelvic Drop
  • Caudal Drop
  • Prone Arm Rest
  • Ankle Rest Extension
  • Shoulder Carrying Strap
  • Cocking Levers on one side of table (choice of Right or Left when lying prone)
Options / Upgrades
  • Walnut Wood Construction
  • Adjustable Height Legs
  • Flexion Distraction
  • Lateral Flexion
  • Elevating Conversion Base (Note: Swing-Away, Flexion Distraction and Lateral Flexion can not be used when Tour is mounted to Conversion Base)
Accessories
  • Crescent Arm Rest
  • Comfort Pillow
  • Headpiece Extension Pillow
  • Side Arm Rests
  • Bolsters
  • Height Raising Legs
  • Protective Cover
  • Pull Cart
  • Airline Travel Case
  • FD Travel Case
  • Accessory Carrying Bag
  • Custom Logo

Standard Features

Headpiece
  • Flexion:  0 – 5°,  Extension:  0 – 23°
  • Vertical Elevation:  0 – 6.75” (0 – 17 cm)
  • Straight Drop: & Forward Motion Drop
  • Drop height: Standard 0.54″ (13.7 mm) or Short 0.35” (9 mm)
  • Adjustable tension
  • Compound angle possible, locks into position
  • Cushions are adjustable in width at front end
  • Contoured cushions:  2” thick (0.5” soft foam laminated to 1.5” firm foam)
  • Cocking lever & adjustable tension control on right side (when lying prone)
  • Paper Hanger, Hold-Down & Tear-Off Bar  (One roll of 8.5″ headpiece paper provided)
Prone Arm Rest
  • Adjustable position
  • Optional Crescent Arm Rest (see Accessories)
Thoracic Drop (Incline not available)
  • Drop height of 0.7” (17.5 mm)
  • Cocking lever on one side of table (choose Right or Left while lying prone)
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 6.5” x 20”  (41 x 51 cm)
Pelvic Drop
  • Drop height of 1.25” (32 mm) at front
  • Cocking lever on one side of table (choose Right or Left while lying prone)
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 10.5” x 20”  (27 x 51 cm)
Caudal Drop
  • Drop Height of 0.7” (17.5 mm) at front
  • Cocking lever on one side of table (Right or Left when lying prone)
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 20” x 20”  (51 x 51 cm)
Ankle Rest Extension
  • Adjustable Extension:  0 -11” (0 – 28 cm)
  • Locks in any position
  • 6.5” x 20”  (17 x 51 cm)
Abdominal Swing-Away
  • Swing-Away from 0 – 7”
  • Locks into position along arc
  • Operates from Right side when lying prone
  • 9” x 16.5”  (23 x 42 cm)
Interchangeable Chest Cushions
  • Firm cushion for Thoracic Drop adjusting
  • Soft cushion for chest comfort
  • Quickly interchangeable
  • Secure magnetic hold
  • Two cushions:  6.5” x 20”  (17 x 51 cm) each
    Shoulder Carrying Strap
    • Adjustable in length
    • Padded for added comfort
    • Retrofits to all Tours (includes hardware & easy instructions)

Optional Features

Adjustable Height Legs
  • Choice of 18 – 25″ (46 – 63.5 cm) or 21 – 30″ (53.5 – 76 cm)
  • Adjustable height in 1″ increments
  • Extremely durable
  • No weight limit
  • Available on all new Tour tables
  • Retrofits to all Tour tables in the field
Abdominal Swing-Away
    • Swing-Away from 0 – 7″
    • Locks into position at any angle along arc
    • Operates from one side of table (same side as cocking levers)
    • Swing-Away section:  6.5″ x 16.5″  (23 x 42 cm)
    • Quickly interchangeable chest cushions
    • Soft cushion for chest comfort
    • Firm cushion for Thoracic Drop technique, secure magnetic hold
    • Two cushions:  9” x 20”  (17 x 51 cm) each
    • Can be used with Flexion Distraction, Lateral Flexion & Conversion Base

Table Specifications

Length 66″ – 77″  (168 – 196 cm) with Ankle Rest extended
Width 20”  (51 cm)
Height Measured from floor to cushion top

Single Height: 17 – 24”  (43 – 61 cm), not adjustable

Adjustable Height Legs: 18 – 25″ or 21 – 30″, adjustable at 1″ increments

Folded Size 27” x 10” x 22”  (69 x 26 x 56 cm)
Weight 70 lbs  (36 kgs)
Table Frame Oak or Walnut, interlocking joints, clear varnish
Foam 1.5” (38 mm) thick, medium firm, high resiliency
Upholstery Tailored sewn Naugahyde

Colors

Color Choices: Standard & Custom

NOTE: Your computer settings may affect the accuracy of the colors shown.

Click here to see photos of the Custom Colors on our tables.

Standard Colors

Burgundy

Espresso

Navy Blue

Black

Custom Colors

Adobe White

Sand

Alabaster

Dove

Greystone

Mocha

Gunmetal

Dusty Jade

Grotto

Emerald Green

Sage

Olive Green

Yew Green

Wedgewood

Blue Ridge

Capri Blue

Sky Blue

Royal Blue

Deep Violet

Concord

Rosalee

Dark Cherry

Paprika

Sun Yellow

Mandarin Orange

Golden Corn

Tomato

Table Height

The table height is the distance from the floor to the top of the table’s cushions.  To determine the best height for you, we recommend that you measure from the floor to the bottom or middle of your patella with shoes on.  Please also take into consideration your body proportions and adjusting style.

Choose a single height (wood legs) or adjustable height (black metal legs):

Single Height: 17 – 24″  (43 – 61 cm), not adjustable
or
Adjustable Height Options (adjustable in 1″ increments):
18 – 25″ or 21 – 30″ (46 – 63.5 cm or 53.5 – 76 cm)
Flexion Distraction & Lateral Flexion note:  A minimum table height of 19″ (48 cm) is necessary to add Flexion Distraction and 20″ (51 cm) to add Lateral Flexion.  If your table has adjustable height legs, FD and LF can only be used at a single height up to 24″ (61 cm), that is determined at the time of purchase.
video-play-button  Watch our Video:  Choosing a Table Height

Flexion Distraction

The Flexion Distraction Device is quick and easy to attach to the Tour and offers gentle, smooth and ergonomic operation.  It also quickly detaches so you can take it on the road too.  A customized Travel Case provides maximum protection.  Upgrade at anytime with Lateral Flexion.

  • Attaches to or detaches from the Tour in one minute
  • Can be added to all Tours after 2001, with table heights of 19″ or greater
  • Retrofit Kit necessary for Tours prior to May 2013
Flexion Range
  • 17 – 18 inch Tour height:  Flexion Distraction not available
  • 19 – 20 inch Tour height:  0 – 11.5 degrees
  • 21 – 24 inch Tour height:  0 – 13 degrees
  • Locks at any angle
  • Caudal Drop can be used at any flexed angle
  • Available on all Tours with table heights of 18′ or greater
Flexion Device Details
  • Smooth, gas spring operation
  • Star Base:  Black (Red Oak or Walnut optional), 21″ diameter base
  • Operating Knob:  Black, Red Oak or Walnut, ergonomic hand-turned hardwood, 3.25″ diameter
  • 5 specialty wheels
  • (2) 10 lb leg counterweights provided
  • Quickly disassembles for compact transport
  • Lateral Flexion can be added at anytime
Recommended Accessories
  • Comfort Pillow recommended for proper patient positioning
  • Plastic office mat (on all floor surfaces) for optimal rolling performance and to prevent potential wheel markings (readily available at retail stores)
Travel Case
  • Black, durable corrugated plastic construction
  • Custom die-cut, low abrasion foam for maximum protection of component parts
  • Straps secure case closed (Blue, Red, Yellow or Black)
  • 26″ x 25″ x 8″,  6 lbs
Tour Portable with Flexion Distraction
Flexion Distraction for Tour Portable

Lateral Flexion

The Lateral Flexion Base offers 30 degrees right and 30 degrees left flexion.  Must be used in conjunction with the Flexion Distraction Device.  Compound angles are also possible and can be quickly locked into position any any angle.  Retrofits to all Tours after 2001, with a table height of 20″ or greater.

  • Red Oak (shroud over Metal Base)
  • 5 specialty wheels offer smooth & instantaneous directional change
  • Non-skid feet
  • 40″  x 20″  x H (4″ less than table height)
Lateral Range
  • 30 degrees right and left
  • Must be used with Flexion Distraction Device
  • Multiple angles possible
  • Locks at any angle
  • Caudal Drop can be used at any angle
  • Available on Tours with table height of 20″ or greater
  • Retrofits to Tours after 2001, with table height of 20″ or greater

Elevating Base

Two tables in one – another innovative Thuli Table design!  Convert the Tour Portable to an Elevation Table in minutes by mounting it to the Conversion Base. With a 10″ vertical range at the touch of a foot switch, the perfect working height is achieved.  Retrofits to most Tours since 1990.  Please note that the Abdominal Swing-Away, Flexion Distraction and Lateral Flexion can not be used when the Tour is mounted to the Conversion Base (all can be used when the Tour is not mounted).  Eligible for the IRS Disabled Access Tax Credit.

Length Base: 53” (135 cm)
With Tour attached: 66” – 72″ (168 – 188 cm) with Ankle Rest extended
Width Base at widest point: 19” (48 cm)
With Tour attached: 20” (51 cm)
Weight Metal: 130 lbs (59 kgs)
Oak: 144 lbs (65 kgs)
With Tour attached: 195 – 210 lbs (88 – 95 kgs)
Base Choice of Metal, Oak or Walnut (shroud over Metal)
Conversion Less than 5 minutes to attach or detach Tour
Vertical Travel 0 -10” (0 – 25 cm), Quiet & smooth
Vertical Speed Approx. 1” (2.5 cm) per second
Weight Capacity 900 lbs (409 kgs)
Foot Pedal Electropneumatic foot pedal, Black
Construction Swiss-engineered & manufactured, Telescoping columns, Worm-geared linear drive
Electrical 110 or 230 Volts
Electric Cord 10 ft (3 m) with ground, Grey
Cord Cover 6 ft (2 m), Grey (optional)

Accessories

Videos

Tour Portable: Swing-Away Operation

Tour Swing-Away: Operation

Dr. Thuli demonstrates the features and operation of the Tour Abdominal Swing-Away.

Tour Swing-Away: Setup

Tour: Setup

Dr. Thuli demonstrates how to most efficiently set-up the Tour.

Tour Swing-Away: Fold-Up

Tour: Fold-Up

Dr. Thuli demonstrates how to most efficiently fold-up the Tour.

patient-positioning

Tour Portable: Patient Positioning

Dr. Thuli demonstrates how to properly position your patient to correctly utilize the table’s features.

caudal-drop-positioning
Tour Portable:
Caudal Drop

What’s the Caudal Drop? Watch this video to find out.

Tour Portable: Swing-Away Operation

Determining the Table Height

Wondering what’s the best table height for you? This video will help.

Flexion Distraction Option for Tour Portable

Tour Flexion Distraction

Dr. Thuli demonstrates how to attach and operate the Flexion Distraction Device.

Lateral Flexion for Tour Portable

Tour Lateral Flexion

Dr. Thuli demonstrates how to attach and operate both the Lateral Flexion Base and Flexion Distraction Device.

Flexion Distraction Retrofit for Tour Portable

Tour Flexion Distraction Retrofit

For Tours built before May, 2013 with table heights of 18″ or greater.

Flexion Distraction Retrofit for Tour Portable

Tour Flexion Distraction Installation

For Tours built after May, 2013 with table heights of 18″ or greater.

References

Shipping

We build all products at our facility in Wisconsin.  Completion time varies, so please contact us for the current lead time.  We offer a Rush Service if needed.  Please inquire for details.

The shipping cost and transit time varies with location.  Please contact us with your full delivery address and we will promptly provide you with a quote.

International Sales:   Our shipping cost does not include import duty and taxes, which are determined at the time of custom clearance.  Every country uses a different formula for calculating the import duty and taxes, which are based on the value of the products ordered.  These fees are payable to the shipping company prior to delivery.  Brokerage fees are included in the shipping cost, except for UPS Standard Service to Canada and US Postal Service shipments.

Shipper UPS or DHL
Box Size 30” x 10” x 28”  (76 x 25 x 71 cm)
Shipping weight 84 lbs  (38 kgs)

Prices

Table Features

$ 2275 Standard Features: Oak Construction
250 Walnut Construction
350 Adjustable Height Legs
1500 Flexion Distraction Device (FD)
50 FD Star Base: Optional Oak or Walnut
1500 Lateral Flexion Base, Oak
1650 Lateral Flexion Base, Walnut
2275 Conversion Base, Metal
2875 Conversion Base, Oak
3075 Conversion Base, Walnut
125 Custom Color

Accessories

$ 25 Prone Arm Rest Shields
175 Crescent Arm Rest
150 Comfort Pillow
75 Headpiece Extension Pillow
175 Height Raising Legs
75 Headpiece Extension Pillow
50 20″ Bolster
55 24″ Bolster
60 Protective Cover
40 Shoulder Strap
75 Pull Cart
225 Airline Travel Case, Lightweight
225 Travel Case for Flexion Distraction Device
50 Carrying Bag for Accessory
125 Logo on Table, Protective Cover or Travel Case

You may also like…


Go to Top