Tour

30 years of proven performance!

The Tour Portable has been our signature table since 1982.  Its unsurpassed design & quality craftsmanship has withstood rigorous use by thousands of students and chiropractors worldwide.  With ingenious upgrades available, the Tour is ready for anything when you are!

Choice of Red Oak or Walnut wood

SKU: TPT Category:

Description

Standard Features
  • Oak Construction
  • Headpiece Flexion, Extension & Elevation
  • Headpiece Straight Drop & Forward Motion Drop
  • Thoracic Incline, 30°
  • Prone Arm Rest
  • Ankle Rest Extension
  • Cocking Lever side (choice of Right or Left)
Options / Upgrades
  • Walnut Construction
  • Thoracic Drop
  • Pelvic Drop
  • Caudal Drop
  • Abdominal Swing-Away
  • Flexion Distraction
  • Lateral Flexion
  • Elevating Conversion Base
Accessories
  • Crescent Arm Rest
  • Comfort Pillow
  • Headpiece Extension Pillow
  • Side Arm Rests
  • Bolsters
  • Height Raising Legs
  • Protective Cover
  • Pull Cart
  • Airline Travel Case
  • Flexion Distraction Travel Case
  • Accessory Carrying Bag
  • Custom Logo

Standard Features

Headpiece
  • Flexion:  0 – 5°,  Extension:  0 – 23°
  • Vertical Elevation:  0 – 6.75”  (0 -17 cm)
  • Straight Drop & Forward Motion Drop:  0.62”  (16 mm) drop height, adjustable tension
  • Compound angles possible, locks into position
  • Cushions are adjustable in width at front end
  • Contoured cushions:  2” thick  (0.5” soft foam laminated to 1.5” firm foam)
  • Cocking lever & adjustable tension control on one side of table (patient’s right while prone)
  • Paper Hanger, Hold-Down & Tear-Off Bar  (One roll of 8.5″ headpiece paper provided)
Prone Arm Rest
  • Adjustable position
  • Optional Crescent Arm Rest (see Accessories)
Ankle Rest Extension
  • Adjustable Extension:  0 -11”  (0 – 28 cm)
  • Locks in any position
  • 6.5” x 20”  (17 x 51 cm)

Optional Features

Thoracic Drop & Incline (optional)
  • Drop height of 0.7”  (17.5 mm) at front
  • Inclines to fixed 30°  (7.5” /19 cm) at front.  Does not drop in inclined position.
  • Cocking lever on one side of table (Right or Left): determined when patient is lying prone
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 16” x 20”  (41 x 51 cm)
Pelvic Drop (optional)
  • Drop height of 1.25”  (32 mm) at front
  • Cocking lever on one side of table (Right or Left): determined when patient is lying prone
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 10.5” x 20”  (27 x 51 cm)
Caudal Drop (optional)
  • Drop height of 0.7”  (17.5 mm) at front
  • Cocking lever on one side of table (Right or Left): determined when patient is lying prone
  • Adjustable tension control on one side of table (same side as cocking levers)
  • Stainless steel plunger (with compression spring) in high density polyethylene housing
  • 20” x 20”  (51 x 51 cm)
Abdominal Swing-Away (optional)
  • Swing-Away from 0 – 7″
  • Locks into position at any angle along arc
  • Operates from one side of table (same side as cocking levers)
  • Swing-Away section:  6.5″ x 16.5″  (23 x 42 cm)
  • Quickly interchangeable chest cushions
  • Soft cushion for chest comfort  (Ultra-Leather upholstery)
  • Firm cushion for Thoracic Drop technique, secure magnetic hold
  • Two cushions:  9” x 20”  (17 x 51 cm) each
  • Can be used with Flexion Distraction, Lateral Flexion & Conversion Base

Table Specifications

Length66” – 77″  (168 – 196 cm) with Ankle Rest extended
Width20”  (51 cm)
Height17”- 24”  (43 – 61 cm), Choice of one height (not adjustable)
Folded Size27”  x 10”  x 22”  (69 x 25 x 56 cm)
Weight50 – 60 lbs  (23 – 27 kgs), varies with options
Table FrameRed Oak, Interlocking corner joints, durable varnish
Foam1.5” (38 mm) thick, medium firm, high resiliency foam
UpholsteryTailored sewn Naugahyde

Colors

Color Choices:  Standard & Custom

NOTE:  Your computer settings may affect the accuracy of the colors shown.

Standard Colors

Burgundy

Espresso

Navy Blue

Black

Custom Colors (+ $100)

Adobe White

Ivory

Sand

Alabaster

Dove

Greystone

Chestnut

Mocha

Gunmetal

Turquoise

Dusty Jade

Grotto

Emerald Green

Sage

Olive Green

Yew Green

Wedgewood

Capri Blue

Sky Blue

Royal Blue

Crocus

Deep Violet

Sangria

Concord

Rose

Tea Rose

Rosalee

Dark Cherry

Paprika

Sun Yellow

Mandarin Orange

Tomato

Table Height

Choose one height from 17″ –  24″  (43 – 61 cm).   Not adjustable.
Please note:  A table height of 18″ or greater is necessary to add Flexion Distraction and Lateral Flexion.

The table height is the distance from the floor to the top of the table’s cushions.  To determine the best height for you, we recommend that you measure from the floor to the bottom or middle of your patella with shoes on.  Please also take into consideration your body proportions and adjusting style.

video-play-button  Watch our Video:  Choosing a Table Height

Flexion Distraction

The Flexion Distraction Device is quick and easy to attach to the Tour and offers gentle, smooth and ergonomic operation.  It also quickly detaches so you can take it on the road too.  A customized Travel Case provides maximum protection.  Upgrade at anytime with Lateral Flexion.

  • Attaches to or detaches from the Tour in one minute
  • Can be added to all Tours after 2001, with table heights of 18″ or greater
  • Retrofit Kit necessary for Tours prior to May 2013
Flexion Range
  • 17”  Tour height:  Flexion Distraction not available
  • 18”  Tour height:  0 – 11 degrees
  • 19” – 21”  Tour height:  0 – 12 degrees
  • 22” – 24”  Tour height:  0 – 15 degrees
  • Locks at any angle
  • Caudal Drop can be used at any flexed angle
  • Available on all Tours with table heights of 18′ or greater
Flexion Device Details
  • Smooth, gas spring operation
  • Star Base:  Black (Red Oak or Walnut optional), 21″ diameter base
  • Operating Knob:  Black, Red Oak or Walnut, ergonomic hand-turned hardwood, 3.25″ diameter
  • 5 specialty wheels
  • (2) 10 lb leg counterweights provided
  • Quickly disassembles for compact transport
  • Lateral Flexion can be added at anytime
Recommended Accessories
  • Comfort Pillow recommended for proper patient positioning
  • Plastic office mat (on all floor surfaces) for optimal rolling performance and to prevent potential wheel markings (readily available at retail stores)
Travel Case
  • Black, durable corrugated plastic construction
  • Custom die-cut, low abrasion foam for maximum protection of component parts
  • Straps secure case closed (Blue, Red, Yellow or Black)
  • 26″ x 25″ x 8″,  6 lbs

Lateral Flexion

The Lateral Flexion Base offers 30 degrees right and 30 degrees left flexion.  Must be used in conjunction with the Flexion Distraction Device.  Compound angles are also possible and can be quickly locked into position any any angle.  Retrofits to all Tours after 2001, with a table height of 18″ or greater.

  • Red Oak (shroud over Metal Base)
  • 5 specialty wheels offer smooth & instantaneous directional change
  • Non-skid feet
  • 40″  x 20″  x H (4″ less than table height)
Lateral Range
  • 30 degrees right and left
  • Must be used with Flexion Distraction Device
  • Multiple angles possible
  • Locks at any angle
  • Caudal Drop can be used at any angle
  • Available on Tours with table height of 18″ or greater
  • Retrofits to Tours after 2001, with table height of 18″ or greater

Elevating Base

Two tables in one – another innovative Thuli Tables design!  Convert the Tour portable to an elevating table in minutes by mounting it to the Conversion Base. With a 10″ vertical range at the touch of a foot switch, the perfect working height is achieved.  Retrofits to most Tours since 1990.  Please note that Flexion Distraction can not be used when the Tour is mounted to the Conversion Base.  Eligible for the IRS Disabled Access Tax Credit.

LengthBase: 53” (135 cm)
With Tour attached: 66” – 72″ (168 – 188 cm) with Ankle Rest extended
WidthBase at widest point: 19” (48 cm)
With Tour attached: 20” (51 cm)
WeightMetal: 130 lbs (59 kgs)
Oak: 144 lbs (65 kgs)
With Tour attached: 195 – 210 lbs (88 – 95 kgs)
BaseChoice of Metal, Oak or Walnut (shroud over Metal)
ConversionLess than 5 minutes to attach or detach Tour
Vertical Travel0 -10” (0 – 25 cm), Quiet & smooth
Vertical SpeedApprox. 1” (2.5 cm) per second
Weight Capacity900 lbs (409 kgs)
Foot PedalElectropneumatic foot pedal, Black
ConstructionSwiss-engineered & manufactured, Telescoping columns, Worm-geared linear drive
Electrical110 or 230 Volts
Electric Cord10 ft (3 m) with ground, Grey
Cord Cover6 ft (2 m), Grey (optional)

Accessories

Videos

tour-operation

Tour Portable:  Operation Video

Dr. Thuli demonstrates the features and operation of the Tour.

tour-setup

Tour Portable:  Set-Up Video

Dr. Thuli demonstrates how to most efficiently set-up the Tour.

tour-foldup

Tour Portable:  Fold-Up Video

Dr. Thuli demonstrates how to most efficiently fold-up the Tour.

patient-positioning

Tour Portable:  Patient Positioning

Dr. Thuli demonstrates how to properly position your patient on our table to correctly utilize its features.

caudal-drop-positioning

Tour Portable:  Caudal Drop

Dr. Thuli demonstrates how to position your patient over the Caudal Drop.

Tour Portable: Swing-Away Operation

Tour Abdominal Swing-Away

Dr. Thuli demonstrates the operation and features on the Abdominal Swing-Away.

Tour Portable: Swing-Away Operation

Determining the Table Height

Wondering what’s the best table height for you?  This video will help.

Flexion Distraction Option for Tour Portable

Tour Flexion Distraction

Dr. Thuli demonstrates how to attach and operate the Flexion Distraction Device.

Lateral Flexion for Tour Portable

Tour Lateral Flexion

Dr. Thuli demonstrates how to attach and operate both the Lateral Flexion Base and Flexion Distraction Device.

Flexion Distraction Retrofit for Tour Portable

Tour Flexion Distraction Retrofit

For Tours built before May, 2013 with table heights of 18″ or greater.

Flexion Distraction Retrofit for Tour Portable

Tour Flexion Distraction Installation

For Tours built after May, 2013 with table heights of 18″ or greater.

References

Shipping

We build all products at our facility in Wisconsin.  Completion time varies, so please contact us for the current lead time.  We offer a Rush Service if needed.  Please inquire for details.

Transit time is 1 – 10 business days, based on the destination address.  For a shipping cost, please contact us with your full delivery address and we will promptly provide you with a quote.

International Sales:   Our shipping cost does not include import duty and taxes, which are determined at the time of custom clearance.  Every country uses a different formula for calculating the import duty and taxes, which are based on the value of the products ordered.  These fees are payable to the shipping company prior to delivery.  Brokerage fees are included in the shipping cost, except for UPS Standard Service to Canada and US Postal Service shipments.

ShipperUPS or DHL
Box size30” x 10” x 28”  (76 x 25 x 71 cm)
Shipping weight53 – 69 lbs  (24 – 31 kgs)

Prices

Table Features

$ 1275Standard Features, Oak Construction
250Walnut Construction
100Thoracic Drop
100Pelvic Drop
100Caudal Drop
525Abdominal Swing-Away
1300Flexion Distraction Device (FD)
50FD Star Base: Optional Oak or Walnut
1300Lateral Flexion Unit
1850Conversion Base, Metal
2450Conversion Base, Oak
2650Conversion Base, Walnut
100Custom Color

Accessories

$ 175Crescent Arm Rest
150Comfort Pillow
75Headpiece Extension Pillow
175Height Raising Legs
175Side Arm Rests
75Bolster (2.75″)
75Bolster (4.25″)
60Protective Cover
75Pull Cart
175Airline Travel Case, Lightweight
275Airline Travel Case, Heavy-Duty
175Travel Case for Flexion Distraction Device
50Carrying Bag for Accessory
100Logo on Table, Protective Cover or Travel Case

You may also like…