Let’s all get comfortable!
Add the Abdominal Swing-Away feature to the Tour and pregnant women and those with a little extra around the middle can comfortably lie prone again!
Choice of Red Oak or Walnut!
Standard Features
- Oak Construction
- Abdominal Swing-Away
- Interchangeable Chest Cushions: Firm Cushion for adjusting and Soft Cushion for female comfort
- Headpiece Flexion, Extension & Elevation
- Headpiece Straight Drop & Forward Motion Drop
- Thoracic Drop
- Pelvic Drop
- Prone Arm Rest
- Ankle Rest Extension
Options / Upgrades
- Walnut Construction
- Caudal Drop
- Flexion Distraction
- Lateral Flexion
- Elevating Conversion Base
Accessories
- Crescent Arm Rest
- Comfort Pillow
- Headpiece Extension Pillow
- Side Arm Rests
- Bolsters
- Height Raising Legs
- Protective Cover
- Pull Cart
- Airline Travel Case
- FD Travel Case
- Accessory Carrying Bag
- Custom Logo
Headpiece
- Flexion: 0 – 5°, Extension: 0 – 23°
- Vertical Elevation: 0 – 6.75” (0 -17 cm)
- Straight Drop & Forward Motion Drop: 0.62” (16 mm) drop height, adjustable tension
- Compound angle possible, locks into position
- Cushions are adjustable in width at front end
- Contoured cushions: 2” thick (0.5” soft foam laminated to 1.5” firm foam)
- Cocking lever & adjustable tension control on one side of table (patient’s right while prone)
- Paper Hanger, Hold-Down & Tear-Off Bar (One roll of 8.5″ headpiece paper provided)
Prone Arm Rest
- Adjustable position
- Optional Crescent Arm Rest (see Accessories)
Thoracic Drop
- Drop height of 0.7” (17.5 mm)
- Cocking lever on one side of table (patient’s right while prone)
- Adjustable tension control on one side of table (patient’s right while prone)
- Stainless steel plunger (with compression spring) in high density polyethylene housing
- 6.5” x 20” (41 x 51 cm)
Pelvic Drop
- Drop height of 1.25” (32 mm) at front
- Cocking lever on one side of table (patient’s right while prone)
- Adjustable tension control on one side of table (patient’s right while prone)
- Stainless steel plunger (with compression spring) in high density polyethylene housing
- 10.5” x 20” (27 x 51 cm)
Ankle Rest Extension
- Adjustable Extension: 0 -11” (0 – 28 cm)
- Locks in any position
- 6.5” x 20” (17 x 51 cm)
Abdominal Swing-Away
- Swing-Away from 0 – 7”
- Locks into position along arc
- Operates from one side of table (patient’s right while lying prone)
- 9” x 16.5” (23 x 42 cm)
Interchangeable Chest Cushions
- Firm cushion for Thoracic Drop adjusting
- Soft cushion for chest comfort
- Quickly interchangeable
- Secure magnetic hold
- Two cushions: 6.5” x 20” (17 x 51 cm) each
Caudal Drop (optional)
- Drop Height of 0.7” (17.5 mm) at front
- Cocking lever on one side of table (patient’s right while prone)
- Adjustable tension control on one side of table (patient’s right while prone)
- Stainless steel plunger (with compression spring) in high density polyethylene housing
- 20” x 20” (51 x 51 cm)
Flexion Distraction
Lateral Flexion
Elevating Conversion Base
Length | 66” – 77″ (168 – 196 cm) with Ankle Rest extended |
Width | 20” (51 cm) |
Height | 17” – 24” (43 – 61 cm), Choice of one height (non-adjustable) |
Folded Size | 27” x 10” x 22” (69 x 26 x 56 cm) |
Weight | 68 – 70 lbs (32 – 36 kgs), varies with table options |
Table Frame | Oak or Walnut, interlocking joints, clear varnish |
Foam | 1.5” (38 mm) thick, medium firm, high resiliency |
Upholstery | Tailored sewn Naugahyde |
Flexion Distraction
Add Flexion Distraction to the Tour Swing-Away by simply folding the table’s back legs into their storage position and effortlessly attaching the ingenious Flexion Distraction. It’s that easy! The Device quickly disassembles so you can take it on the road too.
Flexion Range
- 17″ – 18” Tour height: Flexion Distraction not available
- 19” – 21” Tour height: 0 – 12 degrees
- 22” – 24” Tour height: 0 – 15 degrees
- Locks at any angle
- Caudal Drop can be used at any angle
- Available on all Tours with table heights of 18″ or greater
Device Details
- Smooth, gas spring operation
- Star Base: 21″ diameter – Black (Red Oak or Walnut optional)
- Operating Knob: 3.25″ diameter, ergonomic hand-turned hardwood – Choice of Black, Red Oak or Walnut
- 5 specialty wheels
- (2) 10 lb leg counterweights provided
- Lateral Flexion can be added at anytime
Conversion Time
- Attaches to or detaches from Tour in one minute
Upgrade / Retrofit Kit
- Can be added to all Tours after 2001, with table heights of 19″ or greater
- Retrofit Kit is necessary for Tours prior to May 2013
Accessories Recommended
- Comfort Pillow for proper patient positioning
- Plastic office mat (on all floor surfaces) for optimal rolling performance and to prevent potential wheel markings (readily available at retail stores)
Travel Case
- Black, durable corrugated plastic construction
- Custom die-cut, low abrasion foam for maximum protection of component parts
- Straps secure case closed (Blue, Red, Yellow or Black)
- 26″ x 25″ x 8″, 6 lbs.
Lateral Flexion
The Lateral Flexion Base offers 30 degrees right & 30 degrees left flexion. Must be used in conjunction with the Flexion Distraction Device. Compound angles are also possible and can be quickly locked into position at any angle.
Lateral Range
- Lateral range: 30 degrees right, 30 degrees left
- Locks at any angle
- Caudal Drop can be used at any lateral or flexed angle
- 5 specialty wheels offer smooth, instantaneous directional change
- Must be used in conjunction with Flexion Distraction Device (see details above)
- Available on Tour Swing-Aways with table height of 18″ or greater
Lateral Flexion Base
- Red Oak (shroud over Metal Base)
- Non-skid feet
- 40″ x 20″ x H (4″ less than table height)
Conversion Time
- Attaches to and detaches from Tour Swing-Away in minutes
Elevating Conversion Base
Two tables in one – another innovative Thuli Table design! Convert the Tour Portable to an Elevation Table in minutes by mounting it to the Conversion Base. With a 10″ vertical range at the touch of a foot switch, the perfect working height is achieved. Please note that the Abdominal Swing-Away can not be used when the Tour is mounted to the Conversion Base. Eligible for the IRS Disabled Access Tax Credit.
Specifications
Length | Base: 53” (135 cm)With Tour attached: 66” – 72″ (168 – 188 cm) with Ankle Rest extended |
Width | Base at widest point: 19” (48 cm)With Tour attached: 20” (51 cm) |
Weight | Metal: 130 lbs (59 kgs)Oak: 144 lbs (65 kgs)With Tour attached: 195 – 210 lbs (88 – 95 kgs) |
Base | Choice of Metal, Oak or Walnut (shroud over Metal) |
Conversion | Less than 5 minutes to attach or detach Tour |
Elevation Motor
Vertical Travel | 0 -10” (0 – 25 cm), Quiet & smooth |
Vertical Speed | Approx. 1” (2.5 cm) per second |
Weight Capacity | 900 lbs (409 kgs) |
Foot Pedal | Electropneumatic foot pedal, Black |
Construction | Swiss-engineered & manufactured, Telescoping columns, Worm-geared linear drive |
Electrical | 110 or 230 Volts |
Electric Cord | 10 ft (3 m) with ground, Grey |
Cord Cover | 6 ft (2 m), Grey (optional) |
The table height is the distance from the floor to the top of the table’s cushions. To determine the best height for you, we recommend that you measure from the floor to the bottom or middle of your patella with shoes on. Please also take into consideration your body proportions and adjusting style. Please note: A table height of 19″ or greater is necessary to add Flexion Distraction and Lateral Flexion.
Choose one height from 17″ – 24″ (43 – 61 cm). Not adjustable.

NOTE: Your computer settings may affect the accuracy of the colors shown.
Standard Colors




Custom Colors ($100)

































Crescent Arm Rest
Provides comfortable forearm support for your patients while lying prone. Easily adjustable for individualized comfort and attaches in seconds.
Details

Comfort Pillow
Maximizes facial and cervical comfort for your patient in both the prone and supine positions. Easily adjustable, variable in width.
Details

Headpiece Extension Pillow
Provides added support for the patient’s head during side posture and anterior pelvic adjustments. Quickly attaches to the headpiece.
Details

Side Arm Rests
Increases the 20″ table width in the upper torso region to 28″ (non-adjustable). Right side must be removed to use the Thoracic and Pelvic drops.
Details

Height Raising Legs
When in need of a taller table, attach these legs in minutes to bring the Tour to a second working height, up to 30″ (non-adjustable).
Details

Protective Cover
Provides excellent protection for the Tour while traveling by car or foot. Works well with the Pull Cart for ease of travel. Add your business logo for a personalized touch.
Details

Pull Cart
Transporting your table is easy with this strong, lightweight and compact Pull Cart. You’ll find other great uses for it too!
Details

Airline Travel Case
Traveling by air? The Tour is well protected in this easy-to-load case. Choose colored straps for easy identification at the baggage claim. Add your business logo for a personalized touch.
Details

Flexion Distraction Travel Case
The Flexion Distraction Device quickly disassembles and each component part is individually protected during car or air travel.
Details

Accessory Carrying Bag
A convenient way to transport your table accessory. Custom-sized, lightweight, durable and equipped with an adjustable shoulder strap.
Details

Custom Logos
Personalize your Tour, Protective Cover or Airline Travel Case with your business logo (or any image of your choice). Simply provide us with a digital file and we’ll take care of the rest!
Details
Videos
Dr. Thuli demonstrates the features and operation of the Tour Abdominal Swing-Away.
Dr. Thuli demonstrates how to most efficiently set-up the Tour.
Dr. Thuli demonstrates how to most efficiently fold-up the Tour.
Dr. Thuli demonstrates how to properly position your patient to correctly utilize the table’s features.
What’s the Caudal Drop? Watch this video to find out.
Wondering what’s the best table height for you? This video will help.
Dr. Thuli demonstrates how to attach and operate the Flexion Distraction Device.
Dr. Thuli demonstrates how to attach and operate both the Lateral Flexion Base and Flexion Distraction Device.
For Tours built before May, 2013 with table heights of 18″ or greater.
For Tours built after May, 2013 with table heights of 18″ or greater.
We build all products at our facility in Wisconsin. Completion time varies, so please contact us for the current lead time. We offer a Rush Service if needed – please inquire for details.
Shipping time is 1 – 10 business days. For a shipping cost, please contact us with your delivery address and we will promptly provide you with a quote.
International Sales: UPS will serve as the broker to clear customs. Our prices do not include import duty and taxes, which are determined by the country of import and are based on the value of the products ordered. These fees are payable to UPS prior to delivery. Brokerage fees are included in the shipping cost (except for UPS Standard Service to Canada).

Shipper | UPS |
Two Boxes | 30” x 10” x 28” (76 x 25 x 71 cm) 26″ x 16″ x 3″ (66″ x 41″ x 7″) |
Shipping weights | 74 – 78 lbs (34 – 36 kgs) (2 kgs) |
Student Group Discounts: Tour & Sport Portables
Quantity | Discount (includes accessories) |
2 | 4% |
3 | 6% |
4 – 9 | 8% |
10 – 19 | 10% |
20 + | 10% + 25% off 1 accessory |
Discounts do not apply to a custom color or shipping cost. |
Ordering Process
- Please complete one of the following order forms and include your group’s name:
- Email or Fax your completed form to: office@thulitables.com / 608.935.9192
- When we receive all of the group’s orders, we will calculate the appropriate discount and email your order to you.
- To confirm your order, please contact us with your payment information. Although the payment is not processed until one day prior to shipping, this information is necessary to place your order into our production schedule.
Table Features
$ 2000 | Standard Features (2 Cervical drops, Thoracic & Pelvic Drops) |
250 | Walnut Construction |
100 | Caudal Drop |
1300 | Flexion Distraction Device (FD) |
50 | FD Star Base: Optional Oak or Walnut |
1300 | Lateral Flexion Base, Oak |
1450 | Lateral Flexion Base, Walnut |
1850 | Conversion Base, Metal |
2450 | Conversion Base, Oak |
2650 | Conversion Base, Walnut |
100 | Custom Color |
Accessories
$ 175 | Crescent Arm Rest |
150 | Comfort Pillow |
75 | Headpiece Extension Pillow |
175 | Height Raising Legs |
75 | Headpiece Extension Pillow |
75 | Bolster (2.75″) |
75 | Bolster (4.25″) |
60 | Protective Cover |
75 | Pull Cart |
175 | Airline Travel Case, Lightweight |
275 | Airline Travel Case, Heavy-Duty |
175 | Travel Case for Flexion Distraction Device |
50 | Carrying Bag for Accessory |
100 | Logo on Table, Protective Cover or Travel Case |